Price $
Home > Massachusetts buy, sell, trade > Massachusetts boats/motorcycles

Posted: Wednesday, November 1, 2017 9:37 AM

Mercruiser 350 inboard/outboard V-8 engine. This is a fully-dressed 2010 engine, with low hours, which was purchased NEW, from an Authorized Mercruiser Dealer, and it was installed by them as well. It is currently, in the boat and running daily. It has always been properly maintained by the best of marine mechanics. This Mercruiser engine is the preferred, fuel-efficient model which has the trouble-free carburetor system, which avoids your having the "Ethanol problems," which have been plaguing other engine designs. It can be started, for you to "hear and see" while running. Only $2,595. For an extra $595, you may have the Alpha I sterndrive, which is in perfect condition also. The price is low, because I am "getting out of boating." When responding, please include your ten-digit phone no., to expedite contact.

Furuno Color Video Sounder: This is new, never-used unit, Model FCV-66?, in the original box. Original cost was $1275. Only $195 or best offer.

OMC 4 cyl. engine, Gimbal Housing. and OMC sterndrive. I think they are of 1989 vintage (but it should be verifed). You may have the engine for $695, the Gimbal Housing for only $495 and the sterndrive for only $595.

NEW Trailer tire and wheel: New, 5.70 x 8” tire and “four-lug” wheel. Never used. Only $19. (New cost was $45.95)

16' Galv. Boat trailer- This is a Cox, all-roller trailer, with 13" wheels, which held a 16' powerboat. Only $495, or best offer.

Maptech Chart Navigator, standard edition. This is everything a boater always wanted, together in this one box. This is new, unused, and still in it’s unopened box, for only $150, or best cash offer (Original cost was $275.95). Maptech's Chart Navigator Standard is a full-featured GPS planning and charting software for laptops and PCs. Chart Navigator Standard includes Raster NOAA Charts of the entire U.S. Coast and Army Corps of Engineers' Inland Waterway Charts, as well as satellite photos, aerial photos, and coastal topographic maps. Chart Navigator Standard also has on-screen display of marine facilities. Included is the Maptech Offshore Navigator program, which provides the tools for route planning and navigating in real time, plus tide and current information for U.S. waters. Chart Navigator Standard can be interfaced with GPS, autopilots and other NMEA 0183 instruments. Create Routes, Manage Waypoints, View Charts, Tide Forecast, FREE chart updates, etc.
Navionics 905P+ Platinum Plus XL3 US Mid Atlantic and Canyons - NEW JERSEY, DELAWARE BAY, CHESAPEAKE BAY, NORTH CAROLINA, BERMUDA From New York Harbor to Cape Romain, including Philadelphia, Norfolk and bathymetric details of all Mid-Atlantic Canyons. Only $195 (New cost is $400) Compatibility Guide
Navionics 906P+ XL3 Platinum Plus SOUTH CAROLINA, FLORIDA, BAHAMAS NORTH From Cape Fear to Long Island to Cedar Keys, including the entire Florida Keys, Dry Tortugas and Cay Sal Bank. Only $195 (New cost is $400) Compatibility Guide

Propeller: Rapture 14 1/2" x 17" stainless prop that is like new, for only $125, instead of the $150 posted, if you can get it quickly.

Anchors and ½” Nylon line: Danforth Model 12 H anchor (for 20’ to 43’ boats), and 75’ of ½ “ nylon line. Only $75 (new cost was $245 for the anchor alone).

Anchor line: New, 100’ of ½” nylon anchor, or docking line. Only $25. (New cost was $78.50)

Mercury 4.5 hp short shaft outboard: This is a seldom-used, two-stroke cycle outboard, (serial no. 48X0408) with a two-bladed prop. The dust is from being in dry storage and it “turns over” just fine. It may run perfectly, but I am selling it as "condition unknown," for only $395, as is, where is, or best offer. (It normally retails for over $1250. Since a dealer offered me $395, I decided that I will take the best offer, as close to that amount as possible, from a private party).

Mercruiser 4.3, V6 inboard/outboard engine. This is a fully-marinized 1989 engine, completely assembled. It would be great for parts, as I don't know if it runs or not. Just the Carb, or oil pan, etc., are worth OVER $450 each. Be sure to include your phone no.

21' EZ Loader galv. trailer. It had a 20' power boat on it. It is the heavy-duty, 3" x 4" box framed design, on a single axle (with heavy duty 14" tires) which makes maneuverability MUCH easier, and avoids the tires "scuffing" on turns, etc. It comes with a dolly jack stand, winch etc. Only $1175 or best offer (Reduced from $1495). It's best to include your phone no.

20' Shoreline Galvanized V trailer, with a 3" x 4" extra-rugged galvanized frame, and 14" galvanized wheels on a single axle. Because it has the extra, heavy-duty frame and bigger tires, it carries the same load as tandem, without the extra cost of a second axle. A single axle is MUCH more maneuverable and you don't have to worry about "scuffing the tires" on corners, etc. It measures 22' long and has 6 1/5’ between “out rigged” fenders. The proper tongue length provides a wonderful "safe zone" between the back of vehicles which have a "blunt back," such as pickup trucks, vans, etc., which avoids the winch stand "impaling the vehicle" on turns. Only $695 or best offer (Reduced from $995, because I want gone ASAP.)

Contact: 9782025710

• Location: Boston

• Post ID: 35703291 massachusetts

Play it safe. Avoid Scammers.

As a precaution, email contact has been disabled in this category because of scam attempts. If this ad does not contain a working phone number, web address, or the poster has forced their email address into the ad, the chances of it being legitimate are very low.

Most of the time, transactions outside of your local area involving money orders, cashier checks, wire transfers or shipping (especially overseas shipping) are scams or frauds.

Report all scam attempts to is an interactive computer service that enables access by multiple users and should not be treated as the publisher or speaker of any information provided by another information content provider. © 2017